CKN’s Approach to Developing Products with Composite Materials - A332
| CKN’s Approach to Developing Products with Composite Materials | |
|---|---|
| Perspectives article | |
| |
| Document Type | Article |
| Document Identifier | 332 |
| Tags | |
| MSTE workflow | DevelopmentDevelopment |
| Prerequisites | |
|
Webinar Date
| |
Introduction[edit | edit source]
There are many approaches used to develop products. Products made from composite materials, however, are unique in that processing has a great effect on the outcome. This webinar introduces the Knowledge in Practice Centre’s approach to composite product development.
The development process for composite products is an iterative cycle that requires careful consideration of MSTEP (Material, Shape, Tooling, Equipment and Process) throughout. The three main stages for the development of products composed of composite materials include selecting the requirements for the design, defining the material and shape, and identifying the process steps. The functional requirements are set as the first step of development and guide the direction of the following steps. The material and shape are considered in regards to the functional requirements, and influence each other during the selection process. Finally, the process steps and methods need to be identified with regards to the material and shape, and the available equipment and tooling.
This webinar provides a guide to navigate the complex nature of composite material part development and point to resources within the KPC to further support your needs.
This presentation is part of CKN’s ongoing Application + Impact (AIM) webinar series. Content discussed in the webinar is linked to the Knowledge in Practice Centre, allowing users to access this and other content in a consistent and coherent manner.
Presenter[edit | edit source]
Truls-Ytre-Eide
Research Engineer, Composites Research Network, Materials Engineering, The University of British Columbia
Dr. Casey Keulen
Assistant Professor of Teaching, Department of Materials Engineering, The University of British Columbia
Director, CKN Knowledge in Practice Centre
Webinar[edit | edit source]
Webinar slides[edit | edit source]
Webinar slides available by clicking on the icon below
Additional information for select chapters[edit | edit source]
| Chapter | Chapter Title | Links to related information in the Knowledge in Practice Centre |
|---|---|---|
| 1 | Welcome & introductions | N/A |
| 2 | Knowledge in Practice Centre | |
| 3 | Overview | |
| 4 | Feasibility of Using Composites | |
| 5 | Integrated Product Development | |
| 6 | Product Development | |
| 7 | Functional Requirements | |
| 8 | Defining Shape | |
| 9 | Material Selection - Fibres | |
| 10 | Material Selection - Polymer Matrix | |
| 11 | Identifying Process Steps | |
| 12 | Summary & wrap-up | N/A |
| 13 | Q&A - Cyclical Debulk Loop | |
| 14 | Q&A - Using Tools and Caul Plates for Sharp Corner | |
| 15 | Q&A - Selecting Tooling on a Low Budget | N/A |
Related pages
| Page type | Links |
|---|---|
| Introduction to Composites Articles | |
| Foundational Knowledge Articles | |
| Foundational Knowledge Method Documents | |
| Foundational Knowledge Worked Examples | |
| Systems Knowledge Articles | |
| Systems Knowledge Method Documents | |
| Systems Knowledge Worked Examples | |
| Systems Catalogue Articles | |
| Systems Catalogue Objects – Material | |
| Systems Catalogue Objects – Shape | |
| Systems Catalogue Objects – Tooling and consumables | |
| Systems Catalogue Objects – Equipment | |
| Practice Documents |
|
| Case Studies | |
| Perspectives Articles |
 |
 |
| About | Help |
Welcome
Welcome to the CKN Knowledge in Practice Centre (KPC). The KPC is a resource for learning and applying scientific knowledge to the practice of composites manufacturing. As you navigate around the KPC, refer back to the information on this right-hand pane as a resource for understanding the intricacies of composites processing and why the KPC is laid out in the way that it is. The following video explains the KPC approach:
Understanding Composites Processing
The Knowledge in Practice Centre (KPC) is centered around a structured method of thinking about composite material manufacturing. From the top down, the heirarchy consists of:
- The factory
- Factory cells and/or the factory layout
- Process steps (embodied in the factory process flow) consisting of:
The way that the material, shape, tooling & consumables and equipment (abbreviated as MSTE) interact with each other during a process step is critical to the outcome of the manufacturing step, and ultimately critical to the quality of the finished part. The interactions between MSTE during a process step can be numerous and complex, but the Knowledge in Practice Centre aims to make you aware of these interactions, understand how one parameter affects another, and understand how to analyze the problem using a systems based approach. Using this approach, the factory can then be developed with a complete understanding and control of all interactions.
Interrelationship of Function, Shape, Material & Process
Design for manufacturing is critical to ensuring the producibility of a part. Trouble arises when it is considered too late or not at all in the design process. Conversely, process design (controlling the interactions between shape, material, tooling & consumables and equipment to achieve a desired outcome) must always consider the shape and material of the part. Ashby has developed and popularized the approach linking design (function) to the choice of material and shape, which influence the process selected and vice versa, as shown below:
Within the Knowledge in Practice Centre the same methodology is applied but the process is more fully defined by also explicitly calling out the equipment and tooling & consumables. Note that in common usage, a process which consists of many steps can be arbitrarily defined by just one step, e.g. "spray-up". Though convenient, this can be misleading.
Workflows
The KPC's Practice and Case Study volumes consist of three types of workflows:
- Development - Analyzing the interactions between MSTE in the process steps to make decisions on processing parameters and understanding how the process steps and factory cells fit within the factory.
- Troubleshooting - Guiding you to possible causes of processing issues affecting either cost, rate or quality and directing you to the most appropriate development workflow to improve the process
- Optimization - An expansion on the development workflows where a larger number of options are considered to achieve the best mixture of cost, rate & quality for your application.
