Reference - Spring-in of curved CFRP/foam-core sandwich structures
| Type | Journal |
|---|---|
| Title | Spring-in of curved CFRP/foam-core sandwich structures |
| Abstract | This paper reports on a comprehensive study on process-induced distortions (PID) of curved CFRP/foam-core sandwich panels. The study's aim is to validate the prediction quality of two existing analytical models and a novel straightforward simulation technique, which utilizes measured spring-in distortions of representative monolithic samples as input. Sandwich specimens with a radius of approximately 350. mm are manufactured with three different core thicknesses and two different core run-out geometries.The manufactured parts show a significant radius reduction which declines for increasing core thickness which is satisfactorily predicted by both, the analytical models and the simulation. The effect of the run-out shape turned out to be of inferior relevance for the investigated specimen configurations. However, it is found to be essential to use plane-stress assumptions and to capture the stiffness ratio between the skins and the core. Therefore, an extension of the Fernlund model is proposed whose predictions match excellently with the measured distortion of the specimens. Given the simplicity of the simulation approach in combination with the limited number of inputs makes it a tool of great value, particularly early on in the design cycle. |
| Authors |
|
| Date | 2015-9 |
| Pages | 155-164 |
| Publisher | Elsevier Ltd |
| Journal | Composite Structures |
| Volume | 128 |
| Websites | |
| DOI | 10.1016/j.compstruct.2015.03.058 |
| ISSN | 02638223 |
| Keywords | A. Layered structures, A. Sandwich structures, E. Process-induced distortions, E. Spring-in prediction |
Welcome
Welcome to the CKN Knowledge in Practice Centre (KPC). The KPC is a resource for learning and applying scientific knowledge to the practice of composites manufacturing. As you navigate around the KPC, refer back to the information on this right-hand pane as a resource for understanding the intricacies of composites processing and why the KPC is laid out in the way that it is. The following video explains the KPC approach:
Understanding Composites Processing
The Knowledge in Practice Centre (KPC) is centered around a structured method of thinking about composite material manufacturing. From the top down, the heirarchy consists of:
- The factory
- Factory cells and/or the factory layout
- Process steps (embodied in the factory process flow) consisting of:
The way that the material, shape, tooling & consumables and equipment (abbreviated as MSTE) interact with each other during a process step is critical to the outcome of the manufacturing step, and ultimately critical to the quality of the finished part. The interactions between MSTE during a process step can be numerous and complex, but the Knowledge in Practice Centre aims to make you aware of these interactions, understand how one parameter affects another, and understand how to analyze the problem using a systems based approach. Using this approach, the factory can then be developed with a complete understanding and control of all interactions.
Interrelationship of Function, Shape, Material & Process
Design for manufacturing is critical to ensuring the producibility of a part. Trouble arises when it is considered too late or not at all in the design process. Conversely, process design (controlling the interactions between shape, material, tooling & consumables and equipment to achieve a desired outcome) must always consider the shape and material of the part. Ashby has developed and popularized the approach linking design (function) to the choice of material and shape, which influence the process selected and vice versa, as shown below:
Within the Knowledge in Practice Centre the same methodology is applied but the process is more fully defined by also explicitly calling out the equipment and tooling & consumables. Note that in common usage, a process which consists of many steps can be arbitrarily defined by just one step, e.g. "spray-up". Though convenient, this can be misleading.
Workflows
The KPC's Practice and Case Study volumes consist of three types of workflows:
- Development - Analyzing the interactions between MSTE in the process steps to make decisions on processing parameters and understanding how the process steps and factory cells fit within the factory.
- Troubleshooting - Guiding you to possible causes of processing issues affecting either cost, rate or quality and directing you to the most appropriate development workflow to improve the process
- Optimization - An expansion on the development workflows where a larger number of options are considered to achieve the best mixture of cost, rate & quality for your application.
