The CKN Knowledge in Practice Centre is in the early stages of content creation and currently focuses on the theme of thermal management.
We appreciate any feedback or content suggestions/requests using the links below

Content requests General feedback Feedback on this page



Home

Home
Introduction to Composites
- Fundamentals of composite materials
  - Composites design
  - Composites manufacturing
- Systems approach to composite materials
Foundational Knowledge
- Materials science
  - Material structure
    - Polymer (matrix) structure
      - Thermoplastic polymers
      - Thermoset polymers
  - Material properties
    - Basic Definitions of Material Properties
      - Thermal conductivity
      - Specific heat capacity
      - Thermal diffusivity
    - Polymer properties
      - Heat of reaction
      - Degree of cure
      - Viscosity (resin)
      - Glass transition temperature (Tg)
    - Reinforcement properties
    - Composite properties
      - Macro-Mechanics
      - Micro-Mechanics
- Processing science
  - Thermal behaviour
    - Heat transfer
      - Conduction
      - Convection
    - Thermal phase transitions of polymers
    - Cure of thermosetting polymers
- Foundational method documents
  - How to measure curing time and degree of cure
  - How to measure gel time
  - How to measure reinforcement content (and corresponding matrix content)
  - Tensile Testing
Systems Knowledge
- System parameters - inputs and outcomes
- System interactions
- Thermal and cure/crystallization management (TM)
  - Effect of material in a thermal management system
  - Effect of shape in a thermal management system
  - Effect of tooling in a thermal management system
  - Effect of equipment in a thermal management system
- Materials deposition and consolidation management (MDCM)
- Residual stress and dimensional control management (RSDM)
  - Effect of material in a RSDM system
  - Effect of shape in a RSDM system
  - Effect of tooling in a RSDM system
  - Effect of equipment in a RSDM system
- Machining and assembly management (MAM)
- Quality/inspection management (QIM)
- Systems knowledge method documents
  - How to perform an experimental thermal profile
Systems Catalogue
- The factory
  - Factory layout (where)
  - Objects in the factory (what)
    - Material
      - Cores & inserts
        
        Foam
        
        Honeycomb
      - Matrix
        
        Epoxy resin
        
        Polyester resin
      - Prepreg
    - Shape
    - Tooling and consumables
    - Equipment
      - Autoclave
      - Room temperature transformation
      - Hot press
      - Oven
  - Factory cells (where and how)
    - Material deposition
      - Compression moulding
      - Vacuum assisted resin transfer moulding (VARTM)/resin infusion (VARI)
    - Thermal transformation
Practice
- Integrated Product Development
  - Practice for Developing a Product
    - Selecting Functional Requirements
    - Shape Development
    - Material Selection
    - Practice for Identifying Process Steps
  - Practice for developing a process step
    - Practice for developing a thermal transformation process step
  - Maintaining part quality when changing curing equipment
  - Maintaining quality when scaling-up from coupons to production-ready parts
  - Maintaining equivalency during cure for different fibre architectures
  - Ensuring appropriate resin flow and part consolidation for a new cure cycle
  - Ensuring appropriate resin flow and part consolidation for a new material
  - Ensuring quality during curing of thick parts
  - Developing production scale tooling
  - Ensuring tooling choice meets part quality metrics
  - Ensuring quality during production of variable thickness parts
- Production Optimization
  - Increasing throughput by curing parts simultaneously
  - Optimizing a cure cycle for improved production rates
- Production Troubleshooting
  - Troubleshooting part quality during cure when changing the reinforcement
  - Troubleshooting tooling to achieve part quality
  - Troubleshooting scale-up issues from thin to thick parts
  - Troubleshooting scaling-up issues from coupons to parts
  - Troubleshooting quality issues during cure for different equipment types
  - Transitioning tooling styles between different thermal transformation equipment
  - Troubleshooting when changing production tooling material
  - Troubleshooting a cure cycle for improved production rates
Case Studies
- Development
  - Conducting a thermal tooling survey on three complex tools of different materials
- Optimization
  - Optimization of a hot press process for bike components
- Troubleshooting
  - Troubleshooting of room temperature processes for large recreational and industrial parts
Perspectives
- Presentations
  - Dr. Anoush Poursartip's cdmHUB global composites expert webinar
- Interviews
  - Interview with Prof. Kevin Potter
- AIM Events - Webinars
  - Porosity in Composite Materials - Part I
  - Pultrusion of Thermoplastic Composites
  - Simulation models for rapid liquid composite molding
  - CKN’s Approach to Developing Products with Composite Materials
  - Introduction to Sandwich Structures - Materials and Processing
  - Case Study: Optimizing a Press Moulding Process
  - Introduction to the welding of thermoplastic composites
  - Introduction to the processing of thermoplastic composites
  - Heat Transfer in Composites Processing
  - Effect of cure on mechanical properties of a composite (Part 2 of 2)
  - Effect of cure on mechanical properties of a composite (Part 1 of 2)
  - Fabric Forming: how it affects design and processing, and how simulation can address this
  - Fibre Architecture: Availability, pros and cons, and selection for my application
  - Strengthening the Canadian Advanced Manufacturing Innovation Ecosystem: What types of intellectual property matter, and to whom?
  - Understanding Polyester Resin Processing: The Effect of Ambient Temperature on the Final Part
  - Composites Process Simulation: A Review of the State of the Art for Product Development
  - Resin Behaviour During Processing: What are the key resin properties to consider when developing a manufacturing process?
  - The Composites Knowledge in Practice Centre – an open resource for composites manufacturing knowledge and best practices
  - Deconstructing composites ''processing'' - Why it seems so complex and how to think about it in a structured way
  - Parameters for Structural Analysis of Composites
  - Costing composite parts
  - Composite materials engineering webinar series
    - Composite materials engineering webinar session 1 - Introduction
    - Composite materials engineering webinar session 2 - Constituent Materials - Fiber
    - Composite materials engineering webinar session 3 - Constituent materials - Resin
    - Composite materials engineering webinar session 4 - Thermal management and resin cure
    - Composite materials engineering webinar session 5 - Manufacturing processes - Introduction
    - Composite materials engineering webinar session 6 - Manufacturing processes - Prepreg processing
    - Composite materials engineering webinar session 7 - Manufacturing processes - Liquid composite moulding
    - Composite materials engineering webinar session 8 - Mechanics of composites - Part 1: Lamina level
    - Composite materials engineering webinar session 9 - Mechanics of composites - Part 2: Laminate level
    - Composite materials engineering webinar session 10 - Failure of composites
    - Composite materials engineering webinar session 11 - Defects
    - Composite materials engineering webinar session 12 - Testing

References
Glossary
Find Pages by attributes (Tag, Theme, MSTE Workflow, Factory Cell)
Contact us
Help
About CKN Knowledge in Practice Centre

Login required

From CKN Knowledge in Practice Centre

Jump to:navigation, search

Please log in or sign up to view other pages.

Retrieved from "https://compositeskn.org/KPC/Special:Badtitle"